"被連線主機設定" 修訂間的差異
(已建立頁面，內容為 "*開啟 「具有進階安全性的 Windows Defender 防火牆」，三種方法： **一、同時按下 Win + R 鍵，輸入 wf.msc 並按 Enter :Image:Global_s01…") |
|||
| 行 1： | 行 1： | ||
*開啟 「具有進階安全性的 Windows Defender 防火牆」，三種方法： | *開啟 「具有進階安全性的 Windows Defender 防火牆」，三種方法： | ||
| + | *Open Windows Defender Firewall with Advanced Security (Three Methods): | ||
**一、同時按下 Win + R 鍵，輸入 wf.msc 並按 Enter | **一、同時按下 Win + R 鍵，輸入 wf.msc 並按 Enter | ||
| + | **Press Win + R, type wf.msc, and then press Enter. | ||
:[[Image:Global_s01.png]] | :[[Image:Global_s01.png]] | ||
<br/> | <br/> | ||
**二、透過電腦搜尋「防火牆」，於搜尋結果「Windows Defender 防火牆」點按滑鼠左鍵開啟 | **二、透過電腦搜尋「防火牆」，於搜尋結果「Windows Defender 防火牆」點按滑鼠左鍵開啟 | ||
| + | **Search for "Firewall" in Windows Search, then click "Windows Defender Firewall" from the search results. | ||
:[[Image:Global_s02.png]] | :[[Image:Global_s02.png]] | ||
<br/> | <br/> | ||
**三、「開始」→「控制台」→「系統及安全性」→「Windows Defender 防火牆」 | **三、「開始」→「控制台」→「系統及安全性」→「Windows Defender 防火牆」 | ||
| + | **Start → Control Panel → System and Security → Windows Defender Firewall | ||
:[[Image:Global_s03.png]] | :[[Image:Global_s03.png]] | ||
:[[Image:Global s04.png]] | :[[Image:Global s04.png]] | ||
<br/> | <br/> | ||
*點選「進階設定」開始進行調整 | *點選「進階設定」開始進行調整 | ||
| + | *Click "Advanced settings" to begin configuring the firewall. | ||
:[[Image:Global_s05.png]] | :[[Image:Global_s05.png]] | ||
<br/> | <br/> | ||
*設定IP範圍 | *設定IP範圍 | ||
| + | *Configure the IP Range | ||
**點選[輸入規則] → 在列表中找到名稱為 「遠端桌面 - 使用者模式 (TCP-In)」→對該規則按右鍵，選擇 [內容] | **點選[輸入規則] → 在列表中找到名稱為 「遠端桌面 - 使用者模式 (TCP-In)」→對該規則按右鍵，選擇 [內容] | ||
| + | **Click "Inbound Rules" → Locate "Remote Desktop - User Mode (TCP-In)" in the list → Right-click the rule and select "Properties" | ||
:[[Image:Global_s06.png]] | :[[Image:Global_s06.png]] | ||
<br/> | <br/> | ||
**切換到 [領域] 索引標籤→在「遠端 IP 位址」區塊，預設通常是「任何 IP 位址」→請改選 [這些 IP 位址]，輸入[140.115.172.0/22]，然後點擊 [新增]。 | **切換到 [領域] 索引標籤→在「遠端 IP 位址」區塊，預設通常是「任何 IP 位址」→請改選 [這些 IP 位址]，輸入[140.115.172.0/22]，然後點擊 [新增]。 | ||
| + | **Switch to the "Scope" tab → Under "Remote IP address," the default setting is usually "Any IP address" → Select "These IP addresses," enter 140.115.172.0/22, click "Add," and then click "OK." | ||
:[[Image:Global_s08.png]] | :[[Image:Global_s08.png]] | ||
於 2026年7月8日 (三) 08:00 的修訂
- 開啟 「具有進階安全性的 Windows Defender 防火牆」，三種方法：
- Open Windows Defender Firewall with Advanced Security (Three Methods):
- 一、同時按下 Win + R 鍵，輸入 wf.msc 並按 Enter
- Press Win + R, type wf.msc, and then press Enter.
- 二、透過電腦搜尋「防火牆」，於搜尋結果「Windows Defender 防火牆」點按滑鼠左鍵開啟
- Search for "Firewall" in Windows Search, then click "Windows Defender Firewall" from the search results.
- 三、「開始」→「控制台」→「系統及安全性」→「Windows Defender 防火牆」
- Start → Control Panel → System and Security → Windows Defender Firewall
- 點選「進階設定」開始進行調整
- Click "Advanced settings" to begin configuring the firewall.
- 設定IP範圍
- Configure the IP Range
- 點選[輸入規則] → 在列表中找到名稱為 「遠端桌面 - 使用者模式 (TCP-In)」→對該規則按右鍵，選擇 [內容]
- Click "Inbound Rules" → Locate "Remote Desktop - User Mode (TCP-In)" in the list → Right-click the rule and select "Properties"
- 切換到 [領域] 索引標籤→在「遠端 IP 位址」區塊，預設通常是「任何 IP 位址」→請改選 [這些 IP 位址]，輸入[140.115.172.0/22]，然後點擊 [新增]。
- Switch to the "Scope" tab → Under "Remote IP address," the default setting is usually "Any IP address" → Select "These IP addresses," enter 140.115.172.0/22, click "Add," and then click "OK."
