檢視被連線主機設定的原始碼

*開啟 「具有進階安全性的 Windows Defender 防火牆」，三種方法：
*Open Windows Defender Firewall with Advanced Security (Three Methods):
**一、同時按下 Win + R 鍵，輸入 wf.msc 並按 Enter
**Press Win + R, type wf.msc, and then press Enter.
:[[Image:Global_s01.png]]
<br/>
**二、透過電腦搜尋「防火牆」，於搜尋結果「Windows Defender 防火牆」點按滑鼠左鍵開啟
**Search for "Firewall" in Windows Search, then click "Windows Defender Firewall" from the search results.
:[[Image:Global_s02.png]]
<br/>
**三、「開始」→「控制台」→「系統及安全性」→「Windows Defender 防火牆」
**Start → Control Panel → System and Security → Windows Defender Firewall
:[[Image:Global_s03.png]]
:[[Image:Global s04.png]]
<br/>
*點選「進階設定」開始進行調整
*Click "Advanced settings" to begin configuring the firewall.
:[[Image:Global_s05.png]]
<br/>
*設定IP範圍
*Configure the IP Range
**點選[輸入規則] → 在列表中找到名稱為 「遠端桌面 - 使用者模式 (TCP-In)」→對該規則按右鍵，選擇 [內容]
**Click "Inbound Rules" → Locate "Remote Desktop - User Mode (TCP-In)" in the list → Right-click the rule and select "Properties"
:[[Image:Global_s06.png]]
<br/>
**切換到 [領域] 索引標籤→在「遠端 IP 位址」區塊，預設通常是「任何 IP 位址」→請改選 [這些 IP 位址]，輸入[140.115.172.0/22]，然後點擊 [新增]。
**Switch to the "Scope" tab → Under "Remote IP address," the default setting is usually "Any IP address" → Select "These IP addresses," enter 140.115.172.0/22, click "Add," and then click "OK."
:[[Image:Global_s08.png]]