NCUCCWiki - 使用者貢獻 [zh-tw]

檔案:Vista8 en.jpg

2009-08-04T15:07:51Z

955002007：

檔案:Vista7 en.jpg

2009-08-04T15:07:39Z

955002007：

檔案:Vista6 en.jpg

2009-08-04T15:07:27Z

955002007：

檔案:Vista5 en.jpg

2009-08-04T15:07:16Z

955002007：

檔案:Vista4 en.jpg

2009-08-04T15:06:55Z

955002007：

新生必讀文件/en

2009-08-04T15:06:28Z

955002007：/* Network Configuration */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please contact our Service Desk.


==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:For Windows Vista, you can check your MAC address by the following steps:
:: Click Start-> All Programs-> Accessories-> Command Prompt, as the picture below:

::[[Image:vista1_en.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:vista2.gif]]

:: the result is shown below:

::Physical Address is equivalent to MAC address (etc. :001731B3521E)

:: Please note that the accurate MAC address we needed should be in the same section with IPv4 address instead of IPv6 address.

::[[Image:vista3_en.jpg]]

:: Write down MAC address as we will need this value for further registration.

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Windows Vista

::Click Windows Start>Control Panel>View Network Status and Task:
::[[Image:vista4_en.jpg]]

::Click View Status:
::[[Image:vista5_en.jpg]]

::Click Properties:
::[[Image:vista6_en.jpg]]

::1．Do not tick Internet Protocol Version6(TCP/IPv6), and tick Internet Protocol Version4(TCP/IPv4)
::2．Click once on Internet Protocol Version4(TCP/IPv4)
::3．Click Properties
::[[Image:vista7_en.jpg]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:vista8_en.jpg]]

※It takes about a day to activate your dormitory network after all configuration is done.
If you do not complete all configurations within grace period, your network may be restricted in use. If so, get your MAC address and come to our terminal room, and you can finish all procedures needed for activating dormitory network at our terminal room.

If all registrations and configurations are done, your dormitory network should be activated within a day. Please note that your dormitory network will never been activated immediately. It takes time!

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T15:05:18Z

955002007：/* Network Configuration */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please contact our Service Desk.


==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:For Windows Vista, you can check your MAC address by the following steps:
:: Click Start-> All Programs-> Accessories-> Command Prompt, as the picture below:

::[[Image:vista1_en.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:vista2.gif]]

:: the result is shown below:

::Physical Address is equivalent to MAC address (etc. :001731B3521E)

:: Please note that the accurate MAC address we needed should be in the same section with IPv4 address instead of IPv6 address.

::[[Image:vista3_en.jpg]]

:: Write down MAC address as we will need this value for further registration.

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Windows Vista

::Click Windows Start>Control Panel>View Network Status and Task:
::[[Image:vista4_en.gif]]

::Click View Status:
::[[Image:vista5_en.gif]]

::Click Properties:
::[[Image:vista6_en.gif]]

::1．Do not tick Internet Protocol Version6(TCP/IPv6), and tick Internet Protocol Version4(TCP/IPv4)
::2．Click once on Internet Protocol Version4(TCP/IPv4)
::3．Click Properties
::[[Image:vista7_en.gif]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:vista8_en.gif]]

※It takes about a day to activate your dormitory network after all configuration is done.
If you do not complete all configurations within grace period, your network may be restricted in use. If so, get your MAC address and come to our terminal room, and you can finish all procedures needed for activating dormitory network at our terminal room.

If all registrations and configurations are done, your dormitory network should be activated within a day. Please note that your dormitory network will never been activated immediately. It takes time!

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

檔案:Vista3 en.jpg

2009-08-04T14:02:24Z

955002007：

檔案:Vista1 en.jpg

2009-08-04T14:02:06Z

955002007：

新生必讀文件/en

2009-08-04T13:12:48Z

955002007：/* Preparing For Setting Up Dormitory Network */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please contact our Service Desk.


==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:For Windows Vista, you can check your MAC address by the following steps:
:: Click Start-> All Programs-> Accessories-> Command Prompt, as the picture below:

::[[Image:vista1_en.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:vista2.gif]]

:: the result is shown below:

::Physical Address is equivalent to MAC address (etc. :001731B3521E)

:: Please note that the accurate MAC address we needed should be in the same section with IPv4 address instead of IPv6 address.

::[[Image:vista3_en.jpg]]

:: Write down MAC address as we will need this value for further registration.

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Windows Vista

::Click Windows Start>Connect To>Show All Connection：
::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4_en.gif]]

::Click Windows Start>Connect To>Show All Connection：
::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5_en.gif]]

::Click Windows Start>Connect To>Show All Connection：
::接著點選內容
::[[Image:vista6_en.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7_en.gif]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:vista8_en.gif]]

※It takes about a day to activate your dormitory network after all configuration is done.
If you do not complete all configurations within grace period, your network may be restricted in use. If so, get your MAC address and come to our terminal room, and you can finish all procedures needed for activating dormitory network at our terminal room.

If all registrations and configurations are done, your dormitory network should be activated within a day. Please note that your dormitory network will never been activated immediately. It takes time!

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件

2009-08-04T06:25:21Z

955002007：

=大終端機室簡介=
考完大考，剛剛才脫離水深火熱的高中生生活，上了大學以後果然遇到很多好玩又新奇的事物，當然也認識了不少親切的學長學姊們；或許在偶然的機會裡，經過學長姐或者是同學的介紹，知道了在大學裡一定要會的東西～網路。舉凡跟以前的高中同學互通伊妹兒 (E-mail)，或者上課時老師指定要上網尋找資料，又或者是上BBS/MSN聊天、交網友等等，幾乎都是每個人都會遇到的事情。所以在中央大學裡知道如何有效的利用網路資源，是一件非常非常重要的事情！　常會聽到學長姐或同學們之間相約去「計中」上網，到底「計中」是什麼地方呢？　所謂的「計中」是大家的俗稱，真正的全名是「中央大學電子計算機中心」。　那為什麼去計中可以上網呢？　因為電算中心提供的服務裡頭，就有一項是提供一整間教室的電腦讓大家上網用。　讓我們來看看「計中」到底提供了哪些服務。
==服務項目==
:1.大終端機室：約有 100 部電腦開放供全校師生及校外人士上機使用，支援 WINXP / LINUX 視窗作業系統。

:2.大終端機室服務窗口：[[Image:serv1.jpg]]
:由本中心所訓練之工讀生提供'''終端機室內'''之各項系統服務與秩序管理
:其餘中心業務請洽 [[ServiceDesk]]

:3.大終端機室印表機設備：目前備有兩台黑白點陣印表機、兩台黑白雷射印表機及一台彩色雷射印表機供全校師生使用。

:4.大終端機室掃描器設備：配備一台平面掃瞄器以供使用。

==地理位置==
:大終端機室之位置：大終端機室之位置位於志希館一樓，進志希館後右手邊那一間，隔著玻璃窗擺滿電腦的冷氣教室即是。
:[[Image:cc_map.jpg]]
:志希館在校內的位置。

:[[Image:ccbuilding.jpg]]
:志希館全貌。

:[[Image:ncucc1.jpg]]
:志希館近照。

:[[Image:ncucc3.jpg]]
:左圖的左下角放大圖，是電算中心的入口。

:[[Image:view.jpg]]
:終端機室內景象

==開放時間==

:{| border="1" style="border-collapse;"
!類別
!週別
!開放時間
|-
||學期正常期間
||星期一～星期五
||08:00 - 23:00
|-
||
||星期六、日及例假日
||09:00 - 16:00
|-
||寒暑假期間
||星期一～星期五
||08:00 - 17:00
|-
||
||星期六、日及例假日
||09:00 - 16:00
|-
||特別假日
|colspan="2"|端午節、中秋節當天不開放、農曆春節期間不開放， 其餘依學校行事曆另行公告。
|-
||臨時狀況
|colspan="2"|停電、大掃除當天不開放，其餘依狀況臨時公告之。
|}

==使用方式==

:使用方式：
::大終端機室之電腦設備，若人多不敷使用時，優先開放給本校教職員生使用，電腦開機後，會有一支系統登入程式來控管使用者輸入帳號、密碼： 
:::*若為本校師生即可以其計中 SPARC E-mail 帳號密碼來登入系統使用。
:::*校外人士須持身份証件至服務櫃台請值班服務人員核可登錄其身份証號後方可使用。

==使用規則==

:使用規則：

::*禁止攜帶飲料及食物入內食用。
::*禁止打電動玩具。
::*禁止使用P2P軟體。
::*禁止使用學術網路下載違反智財權或善良風俗之影片、軟體、音樂。
::*中心提供機器是支援學生實習及繳交作業用，故在使用者太多，機器不敷使用時，請勿占用機器玩 BBS 、IRC等等與課業無關的網路軟體。
::*請保持使用桌面的整潔，將廢紙整理乾淨。
::*離開時請將電腦正常關機將椅子歸回原位。

=Email服務申請=

==帳號用途==

:1.提供電子郵件帳號信箱空間
::支援 POP3 收信及 SMTP 送信軟體使用，而且支援 SSL 安全協定，讓你不用擔心帳號密碼會被竊取！除此之外，還會定期收到校方定期公告的電子報（中大簡訊...等）
::( 郵件地址： username@cc.ncu.edu.tw )。
::另可提供 Webmail 收信，[[http://webmail.cc.ncu.edu.tw 計中webmial]]

:2.提供個人網頁空間 ( 你的網址：http://web.cc.ncu.edu.tw/~username )
::*網頁空間大小：大學部3MB、碩士班5MB、博士班10MB，至多可申請擴充至三倍

:3.申請宿舍網路必備

:4.計中電腦的登入帳號
::使用計中終端機室的電腦時，作為視窗環境登入所需帳號

:5.使用計中的印表系統必備

:6.中大portal入口網站登入
:提供您在校求學期間所需的資訊服務系統 (包括學籍暨成績查詢成績系統、選課系統、畢業審核系統、教學評量系統、撥款通知查詢等等)

這麼多好處，聰明的你應該知道越早申請越好了吧！
每年八月底前或九月初，入學新生請自行進入[https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php 新生帳號申請介面]啟動帳號，自行設定個人所屬之帳號密碼。

==OutLook Express 收信基礎設定==

:1.首先開啟 OutLook Express，點選上方「工具」功能表的「帳戶」，叫出帳戶視窗。
:[[Image:oe6-1.jpg]]

:2.點選右方「新增」按鈕，然後選擇「郵件」，進入連線精靈。
:[[Image:oe6-2.jpg]]

:3.輸入要顯示的名稱，然後按下一步：
:[[Image:oe6-3.jpg]]

:4.輸入你的電子郵件地址，然後按下一步：
:[[Image:oe6-4.jpg]]

:5.伺服器類型請選擇「POP3」，內收郵件伺服器請輸入「pop3.cc.ncu.edu.tw」，外寄郵件伺服器請輸入「smtp.cc.ncu.edu.tw」，輸入完畢後點選下一步：
:[[Image:oe6-5.jpg]]

:6.輸入你的郵件帳戶名稱（即郵件地址'＠'記號前面的部分），密碼可填可不填（在這裡未輸入密碼時，每次連線收信的時候都會問你一次密碼），然後按下一步：
:[[Image:oe6-6.jpg]]

:7.完成設定。
:8.按上方工具列的「傳送/接收」按鈕，即可收信！

如果你是由校外透過 ISP 連線收 / 送信，在設定完以上步驟之後，必須再加設驗證才可以正常運作，步驟如下：

:1.先開啟 OutLook Express，點選上方「工具」功能表的「帳戶」，叫出帳戶視窗：
:[[Image:oe6-1.jpg]]

:2.選擇「郵件」書籤頁，點選剛剛設好的「帳戶」，然後按下右邊的「內容」按鈕：
:[[Image:oe6-7.jpg]]

:3.選擇「伺服器」標籤頁，並且把下方的「我的伺服器需要驗證」打勾，然後按「設定」按鈕：
:[[Image:oe6-8.jpg]]

:4.選擇「使用與內送伺服器相同的設定」即可。
:[[Image:oe6-9.jpg]]

==OutLook Express 收信-SSL安全協定篇==

:1.首先開啟 OutLook Express，點選上方「工具」功能表的「帳戶」，叫出帳戶視窗。
:[[Image:oe6-1.jpg]]

:2.選擇「郵件」書籤頁，點選方才設好的「帳戶」，然後按下右邊的「內容」按鈕：
:[[Image:oe6-7.jpg]]

:3.選擇「進階」標籤頁，並且把外寄郵件與內送郵件的「這個伺服器需要安全連線」分別打勾，然後按下「確定」按鈕即可：
:P.S 有些防毒軟體不支援SSL寄信(速度會很慢)，請參考所使用之防毒軟體說明
:[[Image:oe6-10.jpg]]
==開啟轉信功能==
電算中心提供【轉信介面】，讓使用者可以把計中帳號的信，轉寄至自己個人常用的信箱(例：Gmail信箱)，請參考本站文件-> [http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD 開啟轉信功能]

==如何將信件利用pop3收至gmail、yahoo、hot mail==
如果您個人最常使用gmail、yahoo或是hot mail 的信箱，也可以利用這些服務提供的 pop3功能，直接收取中大計中提供的信箱郵件，請參考本站文件->
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail 如何將信件利用pop3收至gmail、yahoo、hot mail]

==常見問題==
E-mail服務常見問題，請參考本站文件-> [[E-mail]]

=宿網使用=

==使用規範==
#宿舍電腦網路以提供學生修課為主，不得進行商業行為以及相關違法行為，並確實遵守台灣學術網路之規定及本校相關之規定。
#若因個人之不當使用或電腦之不良造成妨礙他人使用之異常時，則該段網路將受到離線之處置，直至使用者自行將問題解決為止。
#願意遵守網管人員之調配及處置，並盡相關之義務。
#所有 TANet 使用者皆必遵守及履行下列事項：
#*所有使用必須符合 TANet 之目的。
#*禁止使用 TANet 做為傳送具威脅性、猥褻性、不友善性及商業性的資料。
#*禁止使用 TANet 作為干擾或破壞網路上其他使用者或節點之硬軟體系統。此種干擾如散佈電腦病毒、嘗試入侵未經授權之電腦系統、或其他類似之情形者皆在禁止範圍內。
#*網路上所有可存取到之任何資源皆屬其擁有之個人或單位所有，除非已正式開放或授權使用，否則 TANet 使用者禁止使用此等資源。
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「國立中央大學校園電腦網路使用規範」]
#[http://www.edu.tw/moecc/content.aspx?site_content_sn=5257 教育部「尊重網路智財權」宣導網站]

==借用須知==
自宿舍開放日起，所有學生宿舍電腦網路將必須上網申請啟動，經核准後才可使用。依據「國立中央大學宿舍網路管理辦法」第二條基本精神宣示：宿舍之網路建設及服務，不包含於基本之教學，研究，行政等法定任務之中，故採取使用者付費之原則。

民國九十一年九月五日第三七○次行政會議通過：九十二學年度起，申請使用校園宿舍網路者，每片電腦網路卡號，每個學期須繳付 800 元之宿舍電腦網路實習費，其用途為支援宿舍網路管理所需工讀生費用 ( 含支付平時及寒暑假網管之工讀金 )，宿舍網路開放申請使用之要件，須由該舍推出網管後才可受理，宿網使用收費依本校規定繳款方式實施。

==啟動碼的購買與有效期限==
#購買地點：行政大樓出納組
#啟動碼價錢：NTD$ 800/張
#購買時間：
#*上學期：從暑假開始販售(確定時間點請留意計中公告)，至上學期結束。
#*下學期：從寒假開始販售(確定時間點請留意計中公告)，至下學期結束。
#有效期限：依『目前』政策而言，上學期啟動碼可『沿用』至寒假結束；下學期啟動碼可『沿用』至暑假結束。

==臨時帳號的申請流程(沒有中大電算中心核發 Email 帳號的人適用)==
#適用對象：沒有中大電算中心核發 Email 帳號的人適用(通常為無學生證卻住在學生宿舍之人)。
#使用限制：
#*該臨時帳號僅作為登入『宿網系統』使用
#*不管住宿期間有多長，一週、二週或一個月、兩個月，只要想用學生宿網都要購買 NTD$800 的啟動碼。
#申請流程：
::3.1請連線至宿網系統，進入「臨時帳號服務」
::[[Image:Tempuser01.jpg]]

::3.2填寫相關資料後，按下「submit」鍵，送出申請
::[[Image:Tempuser02.jpg]]

::3.3出現註冊成功的畫面
::[[Image:Tempuser03.jpg]]

::3.4檢核個人資料：
::請申請臨時帳號的人，持「身份證明文件(身份證或護照)」到志希館一樓終端機室 ('''進志希館大門右手邊''')，找值班工讀生，待工讀生確認註冊資料無誤後，才會啟動臨時帳號，使其生效。

==學生宿網的『已註冊』與『已啟動』之說明==
#『已註冊』的部分：
#*定義：在學生宿網系統完成個人資料、住宿寢室與使用的網路卡號等相關資料的登錄。
#*想使用學生宿網，就必須是『已註冊』狀態。
#『已啟動』的部分：
#*定義：在學生宿網系統完成『啟動碼』的登錄。
#*『已啟動』的狀態僅為了區別是否有付費購買啟動碼。
#*必須先滿足『已註冊』條件，才能進入『已啟動』的狀態。
#使用時機：
#*約開學日前後一、二週：
#**要求狀態：已註冊
#**主要目的是提供一個充裕的購買啟動碼時間，避免集中單日購買情形。
#**只要是『已註冊』狀態，並且電腦相關網路設定皆正確，就能使用學生宿網。
#*學期中與寒、暑假：
#**要求狀態：「已註冊」且「已啟動」
#**『已註冊』切換至『已註冊＋已啟動』的時間點，請留意計中相關公告。
#學生宿網目前只有『已註冊』與『已註冊+已啟動』兩種狀態。
#啟動碼生效有一定的時間差，若不想受這時間差影響請在宿網『已註冊』時期完成啟動碼的登錄；若在『已註冊+已啟動』時期才註冊啟動碼，將受此時間差影響，在資料更新前會有一段時間無法上網。

==『自動取得 IP 位址』服務說明==
#目的：為了方便使用者從'''寢室'''連線至宿網系統登錄相關資料，以'''取得'''宿網系統所配發的 IP與相關網路設定
#透過「自動取得 IP」服務所取得的 IP 僅能連上宿網系統註冊，無法對外連線
#「寢室 IP 查詢」功能已經取消不再使用。
#完成宿網系統的資料登錄後，即會配發一個能對外連線的 IP 與相關網路設定，請備紙將其抄寫下來並取消「自動取得 IP」，改成手動設定，把相關網路設定填入個人所使用的電腦，重新啟用「區域連線」，靜候三至六小時，待資料在宿網系統生效後就能對外連線。
#設定方式：
::5.1 點選「區域連線」按滑鼠右鍵，選擇內容：
:::5.1.1點選「TCP/IP」
:::5.1.2按下「內容」
::[[Image:dhcp01.JPG]]

::5.2 勾選『自動取得 IP 位址』與『自動取得 DNS 伺服器位址』，然後按下『確定』：
::[[Image:dhcp02.JPG]]

::5.3 讓「自動取得 IP」服務生效：點選「區域連線」，按下滑鼠右鍵，先選擇「停用」，再按右鍵一次，選擇「啟用」
::[[Image:dhcp03.JPG]]

::5.4 完成上述動作，「自動取得 IP」服務就算設定完成了。

==申請前的準備工作==

1.申請計中 SPARC E-mail 帳號：

:作為宿網申請人註冊個人資料用。每年八月底前或九月初，入學新生請自行進入[https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php 新生帳號申請介面]啟動帳號，自行設定個人所屬之帳號密碼。

2.購買、安裝網路卡及網路線：

:一般市售的網路卡及 RJ-45 網路連接線即可，購回網路卡後可依照該產品之安裝說明，將網路卡安裝至電腦，並且安裝其硬體驅動程式。由於網路卡的種類繁多，在此不再贅述。
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||網路卡
||RJ-45網路線
|}
:網路卡安裝完畢後，將網路連接線一端連接電腦，另一端連接寢室內的網路插座，就算完成硬體安裝。

:網路卡的驅動程式安裝完畢後，接下來要確認網路卡是否已經被 WINDOWS 找到。

3.確認網路卡卡號 (MAC Address)：

:須先確認網路卡卡號 ( MAC Address )，以作為申請宿網時填寫資料之用。以下依作業平台分WIN2000/WINXP及VISTA兩種作法：

:網路卡安裝完畢後，必在 WIN2000/WINXP 視窗環境下的查詢方法如下：

::先執行從開始功能表-> 程式集-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:clip18.gif]]

::之後會出現命令提示字元的視窗，請輸入 ipconfig/all 如下圖：

::[[Image:clip19.gif]]

::執行結果如下：

::[[Image:clip20.gif]]

::Physical Address 那一行就是我們要找的網路卡卡號，記下來後面會用到！ 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.決定要從哪裡連上宿網系統註冊宿網：

:連上宿網系統前，請確認自己的寢室 port。宿網連線所用的 port 是以『書桌』上資訊插座所標明的 A、B、C、D為主。

:目前連上宿網系統有兩個方式：
::4.1從寢室內直接連上宿網系統：連線的辦法請參考 3.6 節『自動取得 IP 服務位址說明』
::4.2找可以對外連線上網的電腦：若不想設定『自動取得 IP 服務』，可以找任一台能上網之電腦連上宿網系統。

5.確認所屬宿舍是否已有網管：

:請連至 http://www.cc.ncu.edu.tw/studdorm/ 註冊個人資料（詳情請參照宿網線上申請程序），如果還沒有網管，則該宿舍暫時無法提供網路服務，直至新的網管到任為止。

6.購買啟動碼：

:請至行政大樓一樓出納組購買宿網之啟動碼，每張啟動碼新台幣 800 元，供每人每一張網路卡使用一學期（上學期購買之啟動碼至寒假仍有效，下學期購買之啟動碼至暑假仍有效）。

:完成上述步驟後請使用瀏覽器上網，接著完成線上的申請手續。

==線上申請程序==

===a.註冊個人資料===

:1.至學生宿網首頁( https://uncia.cc.ncu.edu.tw/dormnet/ )，點選「使用者專區」。
:[[Image:dorm1.jpg]]

:2.以計中E-mail帳號密碼登入。
:[[Image:dorm2.jpg]]

:3.點選左邊選單「註冊個人資料」。
:[[Image:dorm3.jpg]]

:4.填入資料、選擇「同意」、點選「確定」。
:[[Image:dorm4.jpg]]

:5.點選「ok」後，點選左邊選單「申請/修改網路」。
:[[Image:dorm5.jpg]]

:6.選擇宿舍名稱，點選「>>」。
:[[Image:dorm6.jpg]]

:7.選擇寢室號碼，點選「>>」。
:[[Image:dorm7.jpg]]

:8.選擇port，點選「>>」。
:[[Image:dorm8.jpg]]

:9.點選「Save and Change」。
:[[Image:dorm9.jpg]]

:10.點選「確定」。
:[[Image:dorm10.jpg]]

===b.註冊MAC===

:1.至學生宿網首頁( https://uncia.cc.ncu.edu.tw/dormnet/ )，點選「使用者專區」。
:[[Image:dorm1.jpg]]

:2.以計中E-mail帳號密碼登入。
:[[Image:dorm2.jpg]]

:3.點選左邊選單「申請/修改網路」。
:[[Image:dorm11.jpg]]

:4.「勾選」寢室資料、填入「MAC Address」、點選「註冊 MAC」。
:[[Image:dorm13.jpg]]

:5.IP確認無誤，點選「ok」。
:[[Image:dorm14.jpg]]

===c.註冊啟動碼===

:1.至學生宿網首頁( https://uncia.cc.ncu.edu.tw/dormnet/ )，點選「使用者專區」。
:[[Image:dorm1.jpg]]

:2.以計中E-mail帳號密碼登入。
:[[Image:dorm2.jpg]]

:3.點選左邊選單「申請/修改網路」，登入啟動碼。
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.登入完成的畫面。
:[[Image:dorm16.jpg]]

===d.更改網路卡號===

:1.至學生宿網首頁( https://uncia.cc.ncu.edu.tw/dormnet/ )，點選「使用者專區」。
:[[Image:dorm1.jpg]]

:2.以計中E-mail帳號密碼登入。
:[[Image:dorm2.jpg]]

:3.點選左邊選單「申請/修改網路」→「更換網路卡號」。
:[[Image:dorm18.jpg]]

:4.填入新的網路卡號後，點選「變更」。
:[[Image:dorm19.jpg]]

===e.更換寢室/port資料===

:1.至學生宿網首頁( https://uncia.cc.ncu.edu.tw/dormnet/ )，點選「使用者專區」。
:[[Image:dorm1.jpg]]

:2.以計中E-mail帳號密碼登入。
:[[Image:dorm2.jpg]]

:3.點選左邊選單「申請/修改網路」→「更換寢室/port」。
:[[Image:dorm20.jpg]]

:4.輸入「確認碼」→點選「刪除/Delete」
:[[Image:dorm21.jpg]]

==網路設定說明==
:a. WinXP

::先從開始功能表->控制台，叫出 <網路連線> 視窗：
::[[Image:clip1.jpg]]

::在區域連線圖樣上按右鍵→內容
::[[Image:clip2.jpg]]

::用滑鼠點選TCP/IP，接著按下 <內容> 
::[[Image:clip3.jpg]]

::接下來設定 IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩 請依圖所示設定。預設閘道與的第三格與IP位址的第三格相同
::[[Image:clip4.jpg]]

::之後按下確定鍵，重開機之後開始使用網路。

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==啟動碼的轉移(臨時帳號 => 正式 Email 帳號)==
#使用限制：
#*僅能從臨時帳號轉移至計中所核發的 Email 帳號
#*若臨時帳號已經完成宿網註冊(即寢室號碼、port...等都登記在臨時帳號下)，請先透過 3.8.5e 節所述之『更換寢室』方式，刪除臨時帳號所登記的寢室資料，這樣新的 Email 帳號才能登記相關寢室資料。
#*開學初期，計中都會統一刪除寒暑假的註冊資料，若個人沒有什麼特殊事由，'''建議在開學初期進行啟動碼轉移即可'''。
#轉移的流程：
::2.1用臨時帳號登入宿網系統後，到使用者專區之『申請/修改網路』頁面，再點選轉讓啟動碼
::[[Image:Transfer01.jpg]]

::2.2填入要轉入啟動碼的學號，按下Give Away
::[[Image:Transfer02.jpg]]

::2.3萬一學號填錯，在登出前都還可以取消轉讓
::[[Image:Transfer03.jpg]]

::2.4欲放棄轉讓者，就打勾後按取回，如不須放棄轉讓者就跳過此步驟
::[[Image:Transfer04.jpg]]

::2.5要轉移的學號確認無誤後，按下Logout登出
::[[Image:Transfer05.jpg]]

::2.6用計中核發的Email帳號登入
::[[Image:Transfer06.jpg]]

::2.7登入後開始填寫資料，註冊自己的宿網
::[[Image:Transfer07.jpg]]

::2.8註冊完畢後，就會看到從臨時帳號轉移過來的啟動碼
::[[Image:Transfer08.jpg]]

==流量管制==

1、依據中央大學學生宿舍網路限流規則：
:*依照前一日之連接校外網路流量資料，上行每日不得超過3GB，下行不予限制。超量者限制連外（出宿網）訊務3天，每增加超過 1 G 加限一天。
:*教學網與宿網間流量不予計算。
:*宿網若因教學及研究需要，得填寫申請表註明理由，經指導教授或系所主管同意後，專案放寬流量限制。其申請放寬流量使用期間在三天以內，由計中組長核定；三天以上則由計中主任核定。
:*實施辦法及細則由電算中心公佈。

2、被禁用之IP及卡號，公佈於下列URL：
:*被禁用之IP ：https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*被禁用之MAC： https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==常見問題==
學生宿網常見問題，請參考本站文件-> [[學生宿網]]

=印表機使用=

==印表機使用說明==

1.電算中心現提供三種印表機：
:*點矩陣印表機，可免費使用。
:*黑白雷射印表機，須付費使用 ( 每張 1元 )。
:*彩色雷射印表機 ( 每張 5元 )。

2.收費方式：
雷射印表機需購買儲值點數 (QUOTA) 方可列印，購買方式：
:*Step 1：到行政大樓出納組購買雷射印表機 QUOTA 啟動碼收執聯 ( 每張100點/ 100 元 )。
:*Step 2：使用瀏覽器連往 http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：選擇 "列印 Quota 登錄"。
:*Step 4：輸入計中核發之 E-mail 帳號及密碼。
:*Step 5：輸入雷射印表機 QUOTA 收執聯上的啟動碼。

3.使用注意事項：
:1. 目前必須在電算中心 SPARC 工作站上有帳號 ( SPARC E-mail )。
:2. QUOTA 限用於大終端機室的雷射印表機。

==印表系統操作方式==
===一般操作===
首先至印表系統登錄( https://www.cc.ncu.edu.tw/printer/ )，在此畫面下輸入計中帳號及密碼，然後點按 <登入>

[[Image:p1.jpg]]

進入此畫面之後在使用者區按列印佇列，即可看到要列印的檔案在Print Job 上

[[Image:p2.jpg]]

點選要列印的文件，即可看到要列印的檔案在佇列中 ,再選擇YES就可以將文件印出。

※ 點矩陣印表機還要到印表機旁的電腦，再點選要列印的文件，才能印出文件。

從終端機室以外的電腦列印 

若是想省去攜帶文件的麻煩，使用者也可以從宿舍或其他地方將文件送至計中的印表機列印唷！

（若文件中有特殊的字型，就不會因為終端機室的電腦沒有安裝使用者需要的字型而導致排版改變）

首先要設定印表機，請參考《印表機設定》

選擇你設定好的印表機按列印之後，一樣要登入印表系統，也會在列印佇列上看到要列印的檔案

[[Image:p2.jpg]]

只是當你選擇要列印的文件時，就會出現如下的錯誤訊息

[[Image:p3.jpg]]

因為預設值是只能用同一 IP 來進行列印，所以必須設定擁有者，才能在不同 IP 下列印文件。所以點選擁有者然後勾選要列印的文件，再按 Set Owner

[[Image:p4.jpg]]

當佇列中的 Owner 變成使用者的學號就表示設定成功，之後只要到終端機室登錄印表系統，再按列印，就可以馬上印出文件囉～
（點矩陣印表機還要到印表機旁的電腦，再點選要列印的文件，才能印出文件）

[[Image:p5.jpg]]

※ 列印過程如遇到問題可詢問服務台值班工讀生。

===PDF轉檔===
印表系統內，還有提供將檔案轉成PDF的服務唷～不過一樣要先設定印表機

在控制台內的印表機與傳真，點選新增印表機進行下一步：

[[Image:p6.jpg]]

選取連接到這台電腦的本機印表機，並取消自動偵測並安裝我的隨插即用印表機

[[Image:p7.jpg]]

選取建立新的連接埠，類型選擇Standard TCP/IP Port

[[Image:p8.jpg]]

接下來跳出視窗，要設定連接埠

[[Image:p9.jpg]]

輸入印表機的 IP 位址，IP 位址為 140.115.195.7

[[Image:p10.jpg]]

連結埠需選自訂，點選設定

[[Image:p11.jpg]]

設定通訊協定選用 LPR ，佇列的名稱填入 pdf ，並且啟用 LPR 位元組計數，然後按確定

[[Image:p12.jpg]]

於是就會出現完成新增連結埠的畫面

[[Image:p13.jpg]]

接下來要選擇要安裝的印表機驅動程式時，建議使用 Apple 的彩色 PostScript 雷射印表機，如 Apple Color LW 12/660 PS

[[Image:p14.jpg]]

印表機名稱可設為 PDF，依個人需求看是否需要設成預設的印表機

[[Image:p15.jpg]]

完成新增印表機之後，就可以開始使用PDF的轉檔功能

[[Image:p16.jpg]]

在列印時選擇PDF專用印表機，然後登入印表系統，就可以看到檔案在使用者區的列印佇列中，點選要列印的文件

[[Image:p17.jpg]]

出現是否要列印的畫面，點選Yes

[[Image:p18.jpg]]

然後按 PDF ，即可看到轉成PDF的文件，可依需要選擇要下載或是要刪除

[[Image:p19.jpg]]

也可直接用右鍵點選檔案，選擇另存目標，就可以看到轉成PDF的檔案囉～

[[Image:p20.jpg]]

=相關遵守法規=

==教育部智慧財產權相關規範==

[http://www.edu.tw/moecc/content.aspx?site_content_sn=5257 教育部智慧財產權相關規範]

==教育部校園網路使用規範 (90.12) ==

[[教育部校園網路使用規範 (90.12)]]

==台灣學術網路使用規範 (86.01.08)==

[[台灣學術網路使用規範 (86.01.08)]]

==台灣學術網路BBS站管理使用公約 (86.04.22)==

[[台灣學術網路BBS站管理使用公約 (86.04.22)]]

==國立中央大學宿舍網路管理委員會組織規程(85.12.02)==

[[國立中央大學宿舍網路管理委員會組織規程(85.12.02)]]

==國立中央大學宿舍網路管理辦法 (85.12.02)==

[[國立中央大學宿舍網路管理辦法 (85.12.02)]]

==國立中央大學校園網路使用規範==

[[國立中央大學校園網路使用規範]]

==網路禮節==

[[網路上之禮節]]

{{Languages}}

新生必讀文件/en

2009-08-04T06:20:29Z

955002007：/* Network Configuration */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please contact our Service Desk.


==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:For Windows Vista, you can check your MAC address by the following steps:
:: Click Start-> All Programs-> Accessories-> Command Prompt, as the picture below:

::[[Image:vista1_en.gif]]

:: Type ipconfig/all in the command prompt window:

::[[Image:vista2_en.gif]]

:: the result is shown below:

::Physical Address is equivalent to MAC address (etc. :001731B3521E)

:: Please note that the accurate MAC address we needed should be in the same section with IPv4 address instead of IPv6 address.

::[[Image:vista3_en.gif]]

:: Write down MAC address as we will need this value for further registration.

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Windows Vista

::Click Windows Start>Connect To>Show All Connection：
::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4_en.gif]]

::Click Windows Start>Connect To>Show All Connection：
::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5_en.gif]]

::Click Windows Start>Connect To>Show All Connection：
::接著點選內容
::[[Image:vista6_en.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7_en.gif]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:vista8_en.gif]]

※It takes about a day to activate your dormitory network after all configuration is done.
If you do not complete all configurations within grace period, your network may be restricted in use. If so, get your MAC address and come to our terminal room, and you can finish all procedures needed for activating dormitory network at our terminal room.

If all registrations and configurations are done, your dormitory network should be activated within a day. Please note that your dormitory network will never been activated immediately. It takes time!

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T06:02:46Z

955002007：/* Preparing For Setting Up Dormitory Network */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please contact our Service Desk.


==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:For Windows Vista, you can check your MAC address by the following steps:
:: Click Start-> All Programs-> Accessories-> Command Prompt, as the picture below:

::[[Image:vista1_en.gif]]

:: Type ipconfig/all in the command prompt window:

::[[Image:vista2_en.gif]]

:: the result is shown below:

::Physical Address is equivalent to MAC address (etc. :001731B3521E)

:: Please note that the accurate MAC address we needed should be in the same section with IPv4 address instead of IPv6 address.

::[[Image:vista3_en.gif]]

:: Write down MAC address as we will need this value for further registration.

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T05:57:54Z

955002007：/* Preparing For Setting Up Dormitory Network */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please contact our Service Desk.


==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:For Windows Vista, you can check your MAC address by the following steps:
:: Click Start-> All Programs-> Accessories-> Command Prompt, as the picture below:

::[[Image:vista1_en.gif]]

:: Type ipconfig/all in the command prompt window:

::[[Image:vista2.gif]]

:: the result is shown below:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

:: Write down MAC address as we will need this value for further registration.

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T05:32:34Z

955002007：/* How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3 */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please contact our Service Desk.


==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T05:31:55Z

955002007：/* Forward Mail to Another E-mail Account */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T05:30:51Z

955002007：/* Forward Mail to Another E-mail Account */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information,
contact our Service Desk.


==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T05:29:43Z

955002007：/* FAQ */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-08-04T05:25:58Z

955002007：/* d. Change Your MAC Address */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

首頁/en

2009-08-04T05:23:24Z

955002007：

'''HomePage'''

----
　　The creation of NCUCCWiki webpage is the idea of the head [http://selab.csie.ncu.edu.tw/yjlee/ Yun-Jung Lee] of [http://www.cc.ncu.edu.tw National Central University Computer Center](called NCUCC as follow). It's purpose to serves the user of National Central University and Local Area Network stronger. To present the Service Desk and NCUCCWiki as a part of relational services. We hope users can realize the services and technical documents which NCUCC serves quickly and resolve the questions that users faced in advance, through reading the content of NCUCCWiki.

　　The contents of NCUCCWiki is written by [http://www.cc.ncu.edu.tw/introduction/member.php the member of NCUCC], [http://wiki.cc.ncu.edu.tw/wiki/Workstud#.E7.8F.BE.E4.BB.BB.E6.88.90.E5.93.A1 part-time group], and [https://140.115.17.31/sysmgr/index.php?section=member system network manage group(SNMG)] at first. Hope it can extend to all teachers and students on campus to share the knowledges.

　　This website limit the size of upload files to 10MB and limit the extension can only be png, gif, jpg, jpeg, doc, docx, xls, xlsx, ppt, pptx, pps, pdf, vsd, tgz, zip, and rar.

If you have any problems or suggestions about this website , please contact us => ( mailto:ncucc@cc.ncu.edu.tw )

[[http://wiki.cc.ncu.edu.tw/wiki/%E6%96%B0%E7%94%9F%E5%BF%85%E8%AE%80%E6%96%87%E4%BB%B6/en Must-read Document for Freshmen]]
{{Languages|首頁}}

新生必讀文件/en

2009-07-31T07:49:53Z

955002007：/* a.Personal Information */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-07-31T07:49:16Z

955002007：/* a.Personal Information */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Personal Info and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

檔案:P18 en.jpg

2009-07-31T07:48:08Z

955002007：已經上載"Image:P18 en.jpg"的新版本

檔案:P18 en.jpg

2009-07-31T07:46:02Z

955002007：

檔案:P17 en.jpg

2009-07-31T07:45:47Z

955002007：

檔案:P16 en.jpg

2009-07-31T07:45:29Z

955002007：

檔案:P15 en.jpg

2009-07-31T07:45:18Z

955002007：

檔案:P14 en.jpg

2009-07-31T07:45:04Z

955002007：

檔案:P13 en.jpg

2009-07-31T07:44:50Z

955002007：

檔案:P12 en.jpg

2009-07-31T07:44:19Z

955002007：

檔案:P11 en.jpg

2009-07-31T07:44:02Z

955002007：

檔案:P10 en.jpg

2009-07-31T07:43:45Z

955002007：

檔案:P18 en.JPG

2009-07-31T07:43:08Z

955002007：

檔案:P17 en.JPG

2009-07-31T07:43:00Z

955002007：

檔案:P16 en.JPG

2009-07-31T07:42:51Z

955002007：

檔案:P15 en.JPG

2009-07-31T07:42:42Z

955002007：

檔案:P14 en.JPG

2009-07-31T07:42:33Z

955002007：

檔案:P13 en.JPG

2009-07-31T07:42:24Z

955002007：

檔案:P12 en.JPG

2009-07-31T07:42:17Z

955002007：

檔案:P11 en.JPG

2009-07-31T07:42:07Z

955002007：

檔案:P10 en.JPG

2009-07-31T07:41:55Z

955002007：

檔案:P9 en.jpg

2009-07-31T07:41:34Z

955002007：

檔案:P8 en.jpg

2009-07-31T07:41:00Z

955002007：

檔案:P7 en.jpg

2009-07-31T07:40:47Z

955002007：

檔案:P6 en.jpg

2009-07-31T07:40:25Z

955002007：

新生必讀文件/en

2009-07-31T07:40:01Z

955002007：/* Convert a File Type to PDF */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Personal Info/b> and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert File Type to PDF===
You can convert a file into the type of PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click "Printers and Faxes". Click "Add a printer" and click "next".

[[Image:p6_en.jpg]]

Select "Local printer attached to this computer" and uncheck "Automatically detect and install my plug and play printer".

[[Image:p7_en.jpg]]

Check "Create a new port" and select "Standard TCP/IP Port"

[[Image:p8_en.jpg]]

A new window "Add Standard TCP/IP Printer Port Wizard" will pop up.

[[Image:p9_en.jpg]]

Enter IP address for the printer, which is 140.115.195.7

[[Image:p10_en.jpg]]

We will now configure port information. Check "Custom" and click "Settings".

[[Image:p11_en.jpg]]

Check "LPR" for protocol and fill in the field "Queue Name" with "pdf". Check "LPR Byte Counting enable" as well. Then Click "OK".
[[Image:p12_en.jpg]]

If success a port configuration completing wizard will pop up.

[[Image:p13_en.jpg]]

Next, you will have to choose a printer installation software. We sugget Apple Color Printer series, for example Apple Color LW 12/660 PS.

[[Image:p14_en.jpg]]

You may enter"PDF" for printer name.

[[Image:p15_en.jpg]]

Configuration is done and you may start using the pdf converter.

[[Image:p16_en.jpg]]

Print your document with the newly-configured pdf converter, and login to print service system. Confirm print job again in the printing queue.
[[Image:p17_en.jpg]]

Click "pdf" at the left menu list and you shall see your file has been converted into pdf file. You can choose to download or delete the file.

[[Image:p18_en.jpg]]

{{Languages|新生必讀文件}}

新生必讀文件/en

2009-07-31T05:23:30Z

955002007：/* Location */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room: terminal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main entrance of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Entrance of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Personal Info/b> and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert a File Type to PDF===
You can convert a file into the type PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click在控制台內的印表機與傳真，點選新增印表機進行下一步：

[[Image:p6.jpg]]

選取連接到這台電腦的本機印表機，並取消自動偵測並安裝我的隨插即用印表機

[[Image:p7.jpg]]

選取建立新的連接埠，類型選擇Standard TCP/IP Port

[[Image:p8.jpg]]

接下來跳出視窗，要設定連接埠

[[Image:p9.jpg]]

輸入印表機的 IP 位址，IP 位址為 140.115.195.7

[[Image:p10.jpg]]

連結埠需選自訂，點選設定

[[Image:p11.jpg]]

設定通訊協定選用 LPR ，佇列的名稱填入 pdf ，並且啟用 LPR 位元組計數，然後按確定

[[Image:p12.jpg]]

於是就會出現完成新增連結埠的畫面

[[Image:p13.jpg]]

接下來要選擇要安裝的印表機驅動程式時，建議使用 Apple 的彩色 PostScript 雷射印表機，如 Apple Color LW 12/660 PS

[[Image:p14.jpg]]

印表機名稱可設為 PDF，依個人需求看是否需要設成預設的印表機

[[Image:p15.jpg]]

完成新增印表機之後，就可以開始使用PDF的轉檔功能

[[Image:p16.jpg]]

在列印時選擇PDF專用印表機，然後登入印表系統，就可以看到檔案在使用者區的列印佇列中，點選要列印的文件

[[Image:p17.jpg]]

出現是否要列印的畫面，點選Yes

[[Image:p18.jpg]]

然後按 PDF ，即可看到轉成PDF的文件，可依需要選擇要下載或是要刪除

[[Image:p19.jpg]]

也可直接用右鍵點選檔案，選擇另存目標，就可以看到轉成PDF的檔案囉～

[[Image:p20.jpg]]
{{Languages|新生必讀文件}}

新生必讀文件/en

2009-07-31T05:22:03Z

955002007：/* Terminal Room */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC. Please take a look around and find out what services do we provide.

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room：Ternimal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main enterence of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Enterence of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Personal Info/b> and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert a File Type to PDF===
You can convert a file into the type PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click在控制台內的印表機與傳真，點選新增印表機進行下一步：

[[Image:p6.jpg]]

選取連接到這台電腦的本機印表機，並取消自動偵測並安裝我的隨插即用印表機

[[Image:p7.jpg]]

選取建立新的連接埠，類型選擇Standard TCP/IP Port

[[Image:p8.jpg]]

接下來跳出視窗，要設定連接埠

[[Image:p9.jpg]]

輸入印表機的 IP 位址，IP 位址為 140.115.195.7

[[Image:p10.jpg]]

連結埠需選自訂，點選設定

[[Image:p11.jpg]]

設定通訊協定選用 LPR ，佇列的名稱填入 pdf ，並且啟用 LPR 位元組計數，然後按確定

[[Image:p12.jpg]]

於是就會出現完成新增連結埠的畫面

[[Image:p13.jpg]]

接下來要選擇要安裝的印表機驅動程式時，建議使用 Apple 的彩色 PostScript 雷射印表機，如 Apple Color LW 12/660 PS

[[Image:p14.jpg]]

印表機名稱可設為 PDF，依個人需求看是否需要設成預設的印表機

[[Image:p15.jpg]]

完成新增印表機之後，就可以開始使用PDF的轉檔功能

[[Image:p16.jpg]]

在列印時選擇PDF專用印表機，然後登入印表系統，就可以看到檔案在使用者區的列印佇列中，點選要列印的文件

[[Image:p17.jpg]]

出現是否要列印的畫面，點選Yes

[[Image:p18.jpg]]

然後按 PDF ，即可看到轉成PDF的文件，可依需要選擇要下載或是要刪除

[[Image:p19.jpg]]

也可直接用右鍵點選檔案，選擇另存目標，就可以看到轉成PDF的檔案囉～

[[Image:p20.jpg]]
{{Languages|新生必讀文件}}

新生必讀文件/en

2009-07-31T05:20:17Z

955002007：/* PDF轉檔 */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC! Please take a look around and find out what services do we provide!

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room：Ternimal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main enterence of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Enterence of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Personal Info/b> and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===Convert a File Type to PDF===
You can convert a file into the type PDF with our print service, but a little setup is needed.

Go to "Control Panel" and double click在控制台內的印表機與傳真，點選新增印表機進行下一步：

[[Image:p6.jpg]]

選取連接到這台電腦的本機印表機，並取消自動偵測並安裝我的隨插即用印表機

[[Image:p7.jpg]]

選取建立新的連接埠，類型選擇Standard TCP/IP Port

[[Image:p8.jpg]]

接下來跳出視窗，要設定連接埠

[[Image:p9.jpg]]

輸入印表機的 IP 位址，IP 位址為 140.115.195.7

[[Image:p10.jpg]]

連結埠需選自訂，點選設定

[[Image:p11.jpg]]

設定通訊協定選用 LPR ，佇列的名稱填入 pdf ，並且啟用 LPR 位元組計數，然後按確定

[[Image:p12.jpg]]

於是就會出現完成新增連結埠的畫面

[[Image:p13.jpg]]

接下來要選擇要安裝的印表機驅動程式時，建議使用 Apple 的彩色 PostScript 雷射印表機，如 Apple Color LW 12/660 PS

[[Image:p14.jpg]]

印表機名稱可設為 PDF，依個人需求看是否需要設成預設的印表機

[[Image:p15.jpg]]

完成新增印表機之後，就可以開始使用PDF的轉檔功能

[[Image:p16.jpg]]

在列印時選擇PDF專用印表機，然後登入印表系統，就可以看到檔案在使用者區的列印佇列中，點選要列印的文件

[[Image:p17.jpg]]

出現是否要列印的畫面，點選Yes

[[Image:p18.jpg]]

然後按 PDF ，即可看到轉成PDF的文件，可依需要選擇要下載或是要刪除

[[Image:p19.jpg]]

也可直接用右鍵點選檔案，選擇另存目標，就可以看到轉成PDF的檔案囉～

[[Image:p20.jpg]]
{{Languages|新生必讀文件}}

新生必讀文件/en

2009-07-31T05:16:13Z

955002007：/* How to Print a Document */

=Terminal Room=
As a freshman of National Central University, everything around here must be new and fresh to you! National Central University Computer Center (NCUCC) with various services is a good helper for every student, especially for those who are new to here. If you have any of the following questions: Where can I get online? Where can I print or scan my works? What resources do NCU have? Maybe you will need to get known with NCUCC! Please take a look around and find out what services do we provide!

==Services==
:1.Terminal Room：About 100 computers are available for staffs and students of NCU. For temporary user, you must take a short registration at our Service Desk before using our computer. Two different types of operating system, Microsoft Windows XP and Ubuntu Linux, are pre-installed.

:2.Service Counter in Terminal Room：[[Image:serv1.jpg]]
:Trained professional students are in charge of environment supervision and any services provided in terminal room.
:For any other services, please refer to [[ServiceDesk]]

:3.Printing Service：Two matrix-dot printers, two black-and-white laser printers and a color laser printer are now available in terminal room.

:4.Scanning Service：A scanner is now available in terminal room.

==Location==
:The location of terminal room：Ternimal room is located at the ground floor of Zhi-Xi Hall. Turn right after entering the main enterence of Zhi-Xi Hall and you will see terminal room.

:[[Image:cc_map.jpg]]
:Map Guide: The Location of Zhi-Xi Hall.

:[[Image:ccbuilding.jpg]]
:Zhi-Xi Hall

:[[Image:ncucc1.jpg]]
:A Closer Look of Zhi-Xi Hall

:[[Image:ncucc3.jpg]]
:Main Enterence of Computer Center

:[[Image:view.jpg]]
:Terminal Room

==Service Hours==

1. Regular Service Hours:
Monday ~ Friday : 08:00 - 23:00
Weekends and Holidays: 09:00 - 16:00

2. Winter/Summer Vacations:
Monday ~ Friday : 08:00 - 17:00
Weekends and Holidays: 09:00 - 16:00

3. Holidays:
Computer Center is closed at Dragon Boat Festival, Moon Festival, and Chinese New Year.

4. Special Occasions:
Computer Center is closed at specaial occasions such as power failure, cleaning and other occasions.

==Get Access to The Computers==

:Staffs and Students of NCU have high priority in using the computers.When a computer is booted, a login program will appear automatically and request for user ID and password.

::For students and staffs of NCU, please login with your own SPARC E-mail account.

::For guests, please bring along your ID card and take a short registration at Service Desk to get a temporary login account.

==Rules and Regulations==

::* No food and drinks are allowed.
::* No PC games are allowed.
::* No Peer-to-Peer softwares are allowed.
::* No abuse acts and illegal activities are allowed.
::* Users with non work-related tasks, such as BBS and IRC, will have lower priority in using the computers.
::* Please keep the desk clean.
::* Please shut down the computer properly and push the chair back after usage.

=E-mailService=

==Purposes of The SPARC E-mail Account==
:1. Provides e-mail service
:: Supports POP3 receiving mail and SMTP sending mail; Supports SSL security protocol to prevent embezzling of account password; Receives campus’ electronic news periodically.
::(E-mail account: username@cc.ncu.edu.tw)
::Webmail service is provided as well. Now you can check your mail on website![[http://webmail.cc.ncu.edu.tw webmial service]]

:2. Provides personal web space (your URL: http://web.cc.ncu.edu.tw/~username please change [username] according to your SPARC account)
::* Web space limited to 3 MB, can be applied to be expanded for three times at most.

:3. Required for applying dormitory network

:4. Used as Computer Center’s log-in account
::You are enable to use the computers in terminal room with your e-mail account.

:5. Required for using Computer Center's printing service

:6. Used as Office of Academic Affairs system log-in account
:The Student’s Status and Grade System, the Course Selection System and the Qualification of Graduation System uses SPARC account to login.


Before the end of August of every year, the Center sends the SPARC account initiating code to every college and postgraduate freshman. At the Freshman Account Applying Interface, use your initiating code to start using the account and set up your own account’s password. [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Apply for freshman account here]

==OutLook Express Configuration (Basic)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2. Select E-mail tab and click New.
:[[Image:Oe2007_eng-2.jpg]]

:3. Click Next.
:[[Image:Oe2007 eng-3.jpg]]

:4. Tick Manually configure server settings or additional server types and click Next.
:[[Image:Oe2007_eng-4.jpg]]

:5. Select Internet E-mail and click Next.
:[[Image:Oe2007_eng-5.jpg]]

:6. Fill in all required information. Fill in "pop3.cc.ncu.edu.tw" for incoming mail server and "smtp.cc.ncu.edu.tw" for outgoing mail server. You can leave your password blank and you have to re-enter your password with every action of clicking Send/Receive mail.
:[[Image:Oe2007_eng-6.jpg]]

:7. Finish.
:8. With every click of Send/Receive mail, you can access to our e-mail service.

Additional authentication is require if you connect to our e-mail service by out-of-school ISP. Please follow the steps below:

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Outgoing Server tab and tick My outgoing server(SMTP) requires authentication, then Click OK.
:[[Image:Oe2007_eng-9.jpg]]

==OutLook Express Configuration (with SSL Security Agreement)==

:1. On the Tools menu, click Account Settings after opening Outlook Express.
:[[Image:Oe2007_eng-1.jpg]]

:2.Select E-mail tab and double click your account.
:[[Image:Oe2007_eng-7.jpg]]

:3. Click More Settings.
:[[Image:Oe2007_eng-8.jpg]]

:4. Select Advanced tab and tick This server requires an encrypted connection (SSL) for incoming server. Select SSL for outgoing server, then click OK.
:P.S: Some anti-virus software may not support SSL connection(or may be slow). Please refer to your anti-virus software documentation before setting up SSL connection.
:[[Image:Oe2007_eng-10.jpg]]

==Forward Mail to Another E-mail Account==
You can forward your mail to one other frequently used e-mail address (etc.your Gmail account). For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E9%96%8B%E5%95%9F%E8%BD%89%E4%BF%A1%E5%8A%9F%E8%83%BD E-mail Forwarding]

==How to Retrieve Mail to Your Gmail, Yahoo, or Hotmail Account Via POP3==
If your frequently used e-mail does provide POP3 service (etc. gmail, yahoo, hotmail), you can retrieve mail from NCUCC SPARC e-mail server to your frequently used e-mail inbox directly. For further information, please refer to the link below:
[http://wiki.cc.ncu.edu.tw/wiki/%E5%A6%82%E4%BD%95%E5%B0%87%E4%BF%A1%E4%BB%B6%E5%88%A9%E7%94%A8pop3%E6%94%B6%E8%87%B3gmail How to retrieve mail in your gmail, yahoo, or hotmail account via POP3]

==FAQ==
For NCUCC e-mail service FAQ, please refer to the link: [[E-mail]]
=Dormitory Network=

==Rules and Regulations==
#Dormitory network is provided under the purpose of academics only. Any commercial or abuse acts are strictly prohibited and users must obey the rules and regulations of Taiwan Academic Network (TANet) as well.
#If any error has occurred and further affect the whole dormitory network because of the improper use of the user, one's network connection will be disposed of off-line until the problem is fixed.
#User should comply with all deployment and disposal given by authorised network administrator.
#As one of the users of TANet, one is required to comply with the rules below:
#*Network resources of TANet must be used under the purpose mentioned in "rules and regulations of TANet" only.
#*It is forbidden to use network resources of TANet for transferring any menacing, obscene, offensive or commercial data.
#*It is forbidden to use network resources for mass mailing, mail bombing, sending spam, spreading viruses and users are not allowed to provide the means to the third parties to perform similar acts.
#*Any resources from the internet belong to the authorised parties. TANet users are forbbiden to access those resources unless any official permission or authorization is obtained.
#[http://www.cc.ncu.edu.tw/document/rules-ncu.php 「Rules and Regulation of National Central University Networking 」]

==How to Apply==
From the opening date of dormitory, students using the dormitory network must fill out the application form on-line for using the network. An extra fee is required because it is not included in essential educational, research, admission principles. During September 5, 2002, the administration council has made the following agreement: Starting from 2003 academic year, users of the dormitory network will be required to pay a fee of 800 NTD for each MAC Address; the fee is for the expenses of the network administrator for each dorm and other supplies. Fee will be accepted after the network administrator of the dorm is selected.

==Purchase a Network Activation Code==
#Location: Cashier Center at The Administration Hall
#Fee：NTD$ 800 each.
#Purchasing period：
#*First Semester：Can be purchased from the summer vacation(please check the annoucement from NCUCC website) until the end of the first semester.
#*Second Semester：Can be purchased from the winter vacation(please check the annoucement from NCUCC website) until the end of the second semester.
#Valid Time：According to our current policy, a network activation code is valid until winter vacation for first semester and is valid until summer vacation for second semester.

==Apply For a Short Term Account(For User Without NCUCC SPARC E-mail Account)==
#Short term user account can be applied by user without NCUCC SPARC e-mail account only(usually for short term students who do not have student ID card).
#Purpose：
#*Used as a temporary log-in account of Dormitory Network System.
#*A network activation code of NTD 800 is required for enabling dormitory network regardless to the using period(that is, you still need a network activation code even if you want to use dormitory network for a week, two weeks, or a month only).
#Procedure for applying short term user account:
::3.1 Connect to Dormitory Network system and click Short Term User
::[[Image:Tempuser eng01.jpg]]

::3.2 Fill in all required information and click submit.
::[[Image:Tempuser_eng02.jpg]]

::3.3 Success
::[[Image:Tempuser_eng03.jpg]]

::3.4 Verification:
::Verification is required before your short term user account can be validated. Please bring your indentity card or passport(depends on the ID no. or passport no. you have filled in just now) and come to the Service Desk of Computer Center(at Zhi-Xi Hall). Service staff on duty will validate your short term account right after the verification.

==Differences Between The Status of 'Registered' and 'Activated' in Dormitory Network System==
#'Registered':
#*Definition：Once a person finish the registration (including personal information, dormitory information and MAC address) on Dormitory Network System, the status is shown as 'registered'.
#*To enable dormitory network, your status must be 'registered'.
#'Activated':
#*Definition：Once a person finish the activation (that is, register a network activation code) on Dormitory Network System, the status is shown as 'activated'.
#*The status of 'activated' show that you has paid the fee for dormitory network.
#*Your status must be 'registered' before you change to 'activated'.
#Grace Period of disabling dormitory network:
#*After one or two weeks after the school opening date:
#**Required status: registered
#**Dormitory network is enabled under 'registered' status and proper network setting.
#**The main purpose of giving this grace period is to avoid the congestion that may be caused by excessive students buying network activation codes in a short period.
#*During semester or winter/summer vacation:
#**Required status: registered and activated
#**Please notice the announcement of the accurate grace period ended date of dormitory network from NCUCC website.
#There are only two statuses in Dormitory Network System: 'registered' and 'registered and activated'.
#It takes time to activate your dormitory network connection even though you have registered a network activation code. To avoid inconvenience, please register your network activation code before the end of grace period.

==DHCP (Dynamic Host Configuration Protocol)==
#Purpose: With obtaining an IP address automatically, you are able to connect to Dormitory Network System before his/her dormitory network has been activated. After activating his/her dormitory network, you will obtain a unique IP address which should be used in the whole semester.
# The IP address obtained automatically has limited connection, that is, you can connect to Dormitory Network System only.
# The function "Dormitory IP Query" has been canceled.
# After the dormitory network is activated, you will obtain a unique IP address and related settings information. Please write down all the given settings and refer to section [[#Network_Configuration]].

#Configuration: obtain an IP address automatically
::5.1 Click Windows Start> Connect To> Show All Connection
::5.2 Right click Local Area Connection and select properties
:::5.2.1 select TCP/IP
:::5.2.2 click properties
::[[Image:Dhcp en01.JPG]]

::5.2 Check Obtain an IP address automatically and Obtain DNS server address automatically, and click ok
::[[Image:Dhcp en02.JPG]]

::5.3 Right click Local Area Connection and left click Disable. After that, right click Local Area Connection and click Enable again.
::[[Image:Dhcp_en03.JPG]]

::5.4 Configuration done.

==Preparing For Setting Up Dormitory Network==

1. Apply for NCUCC SPARC E-mail Account:

:NCUCC SPARC E-mail account is used as the log-in account for our Dormitory Network System. You have to register your personal information for applying for dormitory network. For freshmen, please log-on to [https://uncia.cc.ncu.edu.tw/UnixAccount/enableaccount.php Freshman Account Applying Interface]to apply for your NCUCC SPARC e-mail account.

2.Purchase and install the network adapter and wire:

:A general network adapter and RJ-45 wire is needed. Plug in your hardware device and follow the set up instructions from user manual.
:{| border="1" style="border-collapse;"
|-
||[[Image:dlink.jpg]]
||[[Image:rj45.jpg]]
|-
||Network Adapter
||RJ-45 Wire
|}
:After setting up network adapter, please plug the wire into the socket placed on the wall of your dormitory room.

:If you have installed the driver of network adapter properly, the next step you have to take is to confirm that your Microsoft Windows Operating System has detected the network adapter.

3. Check your Media Access Control address (MAC address):

:When you are applying for dormitory network, you have to provide your MAC address. To check your MAC address, please refer to the steps below(categorize by Windows XP and Windows Vista):

:For WinXP, you can check your MAC address by the following steps：

:: Click Windows Start>All Programs>Accessories>Command Prompt:

::[[Image:Clip_en18.jpg]]

:: Type ipconfig/all in the command prompt window:

::[[Image:Clip19_en.jpg]]

:: the result is shown below:

::[[Image:clip20.gif]]

::Physical Address is equivalent to MAC address. We will need this value for further registration. 

:在Vista視窗環境下，查詢網路卡卡號的方法如下:
::先執行從開始功能表-> 所有程式-> 附屬應用程式-> 命令提示字元，如下圖所示：

::[[Image:vista1.gif]]

::之後會出現命令提示字元的視窗，請輸入ipconfig /all如下圖，接著按下Enter鍵

::[[Image:vista2.gif]]

::執行結果如下:

::網路卡卡號為實體位址後由１２個數字與英文字母所組成的（例：001731B3521E）

::注意：真正的網路卡卡號下所顯示的需為IPv4位址，而非IPv6位址

::[[Image:vista3.gif]]

::將網路卡卡號記下，後面會用到!

4.Connect to Dormitory Network System:

:Please check the internet socket port of your dormitory room before you connect to Dormitory Network System. The internet socket port is placed on the wall near your desk and is usually labeled as A, B, C or D.

:You can connect to Dormitory Network System by the ways below:
::4.1 Connect to Dormitory Network System from your limited dormitory network connection. For further information, please refer to Chapter 3.6 of this documentation Obtain an IP Address Automatically.
::4.2 Find any computers with internet connection: You can log-on to Dormitory Network System with any computers that can access internet websites.

5. Make sure that there is a Network Administrator in your Dormitory:

:Please connect to the URL: http://www.cc.ncu.edu.tw/studdorm/ to make sure that the network administrator at your dormitory has been selected, otherwise you may not be able to use the dormitory network connection.

6. Purchase a Network Activation Code:

:Please buy a network activation code(NTD 800 each) via the cashier center at the Administration Hall.（A network activation code of previous semester are still accessible during winter and summer breaks）。

: After finishing the steps above, please get on-line and finish the last registration.

==Register Your Personal Information On-line:==

===a.Personal Information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Personal Info/b> and fill in your personal information.
:[[Image:DormNetwork_eng03.jpg]]

:4. Click Registration. Follow the instructions shown on website and fill in all required information.
:[[Image:DormNetwork_eng02.jpg]]

:5. After filling all information, click Save and Change. The System will prompt you a confirmation message, please check again your information before clicking OK.
:[[Image:DormNetwork_eng04.jpg]]

===b.Register Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration. You will see a field labeled as MAC Address, please fill in with your MAC address.
:[[Image:DormNetwork_eng05.jpg]]

:4. After registering your MAC address, you will get your own IP address.
:[[Image:dorm14.jpg]]

===c. Register a Network Activation Code===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3.Click Registration and register your network activation code.
:[[Image:dorm15_0.jpg]]
:[[Image:dorm15.jpg]]

:4.Your activation code is successfully registered.
:[[Image:dorm16.jpg]]

===d. Change Your MAC Address===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account。

:3. Click Registration, then click Change MAC Address.
:[[Image:DormNetwork_eng06.jpg]]

:4. Fill in new MAC address and click Change.
:[[Image:dorm19.jpg]]

===e. Change Room/ Port information===

:1. Connect to Dormitory Network System(https://uncia.cc.ncu.edu.tw/dormnet/ ) and click Log-in.
:[[Image:DormNetwork_eng01.jpg]]

:2. Log-in to system with your NCUCC SPARC E-mail Account.

:3. Click Registration, then click Change Room or Port.
:[[Image:DormNetwork_eng07.jpg]]

:4. Enter Confirmation Code and click Delete.
:[[Image:dorm21.jpg]]

==Network Configuration==
:a. WinXP

::Click Windows Start>Connect To>Show All Connection：
::[[Image:Clip_en1.jpg]]

::Right click Local Area Connection and select properties:
::[[Image:Clip_en2.jpg]]

::Click TCP/IP, and click properties :
::[[Image:Dhcp en01.JPG]]

::IP configuration: Enter the unique IP and settings information which is obtained after activating your dormitory network. (A person should have a unique IP. Please make sure you configure your IP correctly)
::Configure Subnet mask as the picture below. The third column of Default gateway have exactly the same value with the third column of IP address
::[[Image:Clip_en3.jpg]]

::Click OK and reboot your computer.

::Cofiguration done.

:b. Vista

::先從開始功能表-> 控制台-> 在左上角點選控制台首頁-> 檢視網路狀態及工作
::[[Image:vista4.gif]]

::開啟網路和共用中心視窗，點選檢視狀態
::[[Image:vista5.gif]]

::接著點選內容
::[[Image:vista6.gif]]

::1．不要勾選Internet Protocol Version6(TCP/IPv6)，並勾選Internet Protocol Version4(TCP/IPv4)
::2．點選Internet Protocol Version4(TCP/IPv4)
::3．按下內容
::[[Image:vista7.gif]]

::接下來設定IP 位址：(這裡的 IP 位址就是上網登錄時所得到的 IP 位址，每台電腦都不相同，必須確實填入！)
::子網路遮罩請依圖所示設定。預設閘道與的第三欄位(xxx)與IP位址的第三欄位相同，之後按下確定鍵
::[[Image:vista8.gif]]

※設定完成後請等候隔天網路自動啟動
如果不是在網路開始管制前啟動網路，網路將被停用。此時可查詢自己的MAC卡號後，到計中大終端機室，利用 e-mail 帳號登入來啟用網路。

若登錄的資料正確無誤，最晚隔天網路即可使用。注意並不是註冊好之後就馬上能用宿網的！

==Transfer a Network Activation Code (From Short Term User Account to Permanent NCUCC SPARC E-mail Account)==
#Restriction on Use:
#*You are allowed to transfer a network activation code from short term user account to permanent NCUCC SPARC E-mail Account only.
#*If you have registered for dormitory network by using short term user account(that is, you have registered dormitory number, port number on Dormitory Network System), you have to delete all the information registered in your short term user account (for following procedure, please refer to [[#e._Change_Room.2F_Port_information|3.8.5.e Change Room and Port Information]]). Only by doing so can you register the same information again in your new permanent SPARC E-mail account.
#*All the registered information of summer or winter vacation shall be reset during school opening period. You are suggested to transfer your network activation code '''after school opened'''.
#Procedure of transfering a network activation code:
::2.1 Sign in Dormitory Network System with your short term user account. Click '''<User Area>''' >'''Registration'''>'''Give Away'''
::[[Image:Transfer01.jpg]]

::2.2 Enter the student ID you wish to tranfer to, then click '''Give Away'''
::[[Image:Transfer02.jpg]]

::2.3 If you enter wrong student ID, you can cancel the transfer before you log out.
::[[Image:Transfer03.jpg]]

::2.4 If you want to cancel the transfer, check the box and click '''OK'''. Otherwise you can skip this step.
::[[Image:Transfer04.jpg]]

::2.5 Make sure the student ID you transfer your network activation code to is correct before you log out.
::[[Image:Transfer05.jpg]]

::2.6 log in with your NCUCC SPRAC E-mail accout.
::[[Image:Transfer06.jpg]]

::2.7 Register for dormitory network.
::[[Image:Transfer07.jpg]]

::2.8 After the registration, you shall get your transfered network activation code from your short term user account.
::[[Image:Transfer08.jpg]]

==Upload Quotas of Dormitory Network==

1. According to NCU Dormitory Network Rules and Regulation:
:*In accordance with the previous day external network traffic statistical information, the maximum upload amount permitted from an on-campus computer to an off-campus location is 3 GB per day and that does not limit the download amount.If any user exceed the limit, she/he will be restricted from using the dormitory network for three days, and increase a day with each additional of 1 GB.
:*The rule above is not applicable to internal data transfer (i.e. data transfer within the campus).
:*The upload limit is expandable under any academics purpose. An application completed in details must be signed by the professor in charge or the director of the department before handing over. Applications for expanding upload limit for three days or below will need the approval of division chief of NCUCC while applications for expanding upload limit for more than three days will need the approval of the director of NCUCC.
:*NCUCC reserved the rights of modifying and publishing the rules above.

2. Restricted IP and MAC address can be found from the links below:
:*Restricted IP :https://website.cc.ncu.edu.tw/dormnet/index.php?section=flowdel
:*Restricted MAC: https://website.cc.ncu.edu.tw/dormnet/index.php?section=lockmac

==FAQ==
For Dormitory Network FAQ, please refer to the link: [[學生宿網]]

=Print Service=

==Print Service of NCUCC==

1. NCUCC currently provides three types of printer in terminal room:
:* Dot-matrix printer, free for faculty, staff and students of NCU.
:* Black-and-White laser printer, provided on a charge basis (NTD. 1/ per page).
:* Color laser printer, provided on a charge basis as well (NTD. 5/ per page).

2. Fee for Print Service:
:The laser printing service is provided on a charge basis. Before using the service, please purchase a print quota:
:*Step 1：Purchase a print quota at the Administration Building. (Per purchasing which consists of 100 quota costs NTD. 100 )。
:*Step 2：Get on-line to Print Service System http://www.cc.ncu.edu.tw/printer/ 。
:*Step 3：Select Regist.
:*Step 4：Log-on to system with your NCUCC SPARC e-mail account.
:*Step 5：Register the quota code you have just purchased.

3. Notice:
:1. NCUCC SPARC e-mail account is a must for using our print service.
:2. Print quota will be accepted in using the print service provided in terminal room only.

==User Guide for Print Service==
===How to Print a Document===
Login to printing service system(https://dolphin.cc.ncu.edu.tw/prtserv/index.php) with your SPARC account, as the picture below:

[[Image:P1_en.jpg]]

Click "Print" and you will find some print jobs in "print queue".

[[Image:P2_en.jpg]]

Click on the job you want to print and confirm again, then your document will be released soon.

※ For dot-matrix printers, you need to confirm your print job again at the printing console which is located beside the dot-matrix printers. Remember to check the status of the printers before you start printing.

Print Documents Outside Terminal Room

User can not only print documents by computers in terminal room, but also any other computers! Users don't have to bring along documents to terminal room under this service.

First you have to set up the printer. Please refer to the manual guide "Setting up Printers".

Print your document and login to our printing service system. As mentioned above, you may see the job in the "printing queue".

[[Image:P2_en.jpg]]

The only difference is that when you select the job, an error message may appear as the picture below:

[[Image:p3.jpg]]

A little setup may need before you start printing. Click "Owner" and check the print job. Then click on the button "Set Owner"

[[Image:p4_en.jpg]]

If success the Owner column of the printing queue change into your SPARC account. Login again to printing service system in terminal room and confirm your print job again, the document will soon to be released.
(for dot-matrix printer, extra confirmation at the printing console is needed.)

[[Image:p5.jpg]]

※ You are welcome to reach our terminal room staff on duty if you encounter any other problems not mentioned above.

===PDF轉檔===
印表系統內，還有提供將檔案轉成PDF的服務唷～不過一樣要先設定印表機

在控制台內的印表機與傳真，點選新增印表機進行下一步：

[[Image:p6.jpg]]

選取連接到這台電腦的本機印表機，並取消自動偵測並安裝我的隨插即用印表機

[[Image:p7.jpg]]

選取建立新的連接埠，類型選擇Standard TCP/IP Port

[[Image:p8.jpg]]

接下來跳出視窗，要設定連接埠

[[Image:p9.jpg]]

輸入印表機的 IP 位址，IP 位址為 140.115.195.7

[[Image:p10.jpg]]

連結埠需選自訂，點選設定

[[Image:p11.jpg]]

設定通訊協定選用 LPR ，佇列的名稱填入 pdf ，並且啟用 LPR 位元組計數，然後按確定

[[Image:p12.jpg]]

於是就會出現完成新增連結埠的畫面

[[Image:p13.jpg]]

接下來要選擇要安裝的印表機驅動程式時，建議使用 Apple 的彩色 PostScript 雷射印表機，如 Apple Color LW 12/660 PS

[[Image:p14.jpg]]

印表機名稱可設為 PDF，依個人需求看是否需要設成預設的印表機

[[Image:p15.jpg]]

完成新增印表機之後，就可以開始使用PDF的轉檔功能

[[Image:p16.jpg]]

在列印時選擇PDF專用印表機，然後登入印表系統，就可以看到檔案在使用者區的列印佇列中，點選要列印的文件

[[Image:p17.jpg]]

出現是否要列印的畫面，點選Yes

[[Image:p18.jpg]]

然後按 PDF ，即可看到轉成PDF的文件，可依需要選擇要下載或是要刪除

[[Image:p19.jpg]]

也可直接用右鍵點選檔案，選擇另存目標，就可以看到轉成PDF的檔案囉～

[[Image:p20.jpg]]
{{Languages|新生必讀文件}}